Direct evidence of interfacial crystallization preventing weld formation during fused filament fabrication of poly(ether ether ketone)

Abstract

Poly(ether ether ketone) (PEEK) is a high-performance, semicrystalline thermoplastic that has attracted significant interest for material extrusion additive manufacturing techniques such as fused filament fabrication (FFF) but remains beset by poor weld strength. Here, it is observed that under typical processing conditions that surface crystallization prevents effective weld formation between printed layers, leading to weak and brittle welds. Utilizing atomic force microscopy, differential scanning calorimetry, bulk tensile fracture testing, and mode III tear testing, appropriate processing conditions and post-print annealing conditions have been developed to improve the weld strength of FFF-PEEK. After printing PEEK in an amorphous state through careful control of the thermal gradients during printing a two-step annealing procedure yields crystalline PEEK welds that are 6–8 times stronger than welds in FFF-PEEK that crystallized during printing.

DOI
10.1016/j.addma.2022.102604
Year