Publications

2021

Kirillova, Alina, Taylor R. Yeazel, Darya Asheghali, Shannon R. Petersen, Sophia Dort, Ken Gall, and Matthew L. Becker. “Fabrication of Biomedical Scaffolds Using Biodegradable Polymers.” Chemical Reviews 121, no. 18 (September 2021): 11238–304. https://doi.org/10.1021/acs.chemrev.0c01200.

Bachtiar, Emilio Omar, Virginia Cary Ritter, and Ken Gall. “Structure-property relationships in 3D-printed poly(l-lactide-co-ε-caprolactone) degradable polymer.” Journal of the Mechanical Behavior of Biomedical Materials 121 (September 2021): 104650. https://doi.org/10.1016/j.jmbbm.2021.104650.

Koshut, W. J., D. Smoot, C. Rummel, A. Kirillova, and K. Gall. “Correction to: Tensile Fatigue of Poly(Vinyl Alcohol) Hydrogels with Bio-Friendly Toughening Agents (Macromolecular Materials and Engineering, (2020), 305, 3, (1900784), 10.1002/mame.201900784).” Macromolecular Materials and Engineering 306, no. 8 (August 1, 2021). https://doi.org/10.1002/mame.202100460.

Barber, H., C. N. Kelly, B. Abar, N. Allen, S. B. Adams, and K. Gall. “Rotational Wear and Friction of Ti-6Al-4V and CoCrMo against Polyethylene and Polycarbonate Urethane.” Biotribology 26 (June 1, 2021). https://doi.org/10.1016/j.biotri.2021.100167.

Kelly, C. N., C. Kahra, H. J. Maier, and K. Gall. “Processing, structure, and properties of additively manufactured titanium scaffolds with gyroid-sheet architecture.” Additive Manufacturing 41 (May 1, 2021). https://doi.org/10.1016/j.addma.2021.101916.

Chug, Manjyot Kaur, Emilio Bachtiar, Nicholas Narwold, Ken Gall, and Elizabeth J. Brisbois. “Tailoring nitric oxide release with additive manufacturing to create antimicrobial surfaces.” Biomaterials Science 9, no. 8 (April 2021): 3100–3111. https://doi.org/10.1039/d1bm00068c.

Kelly, Cambre N., Angela Sp Lin, Kelly Eh Leguineche, Sudhanshu Shekhar, William R. Walsh, Robert E. Guldberg, and Ken Gall. “Functional repair of critically sized femoral defects treated with bioinspired titanium gyroid-sheet scaffolds.” Journal of the Mechanical Behavior of Biomedical Materials 116 (April 2021): 104380. https://doi.org/10.1016/j.jmbbm.2021.104380.

Koshut, W. J., C. Rummel, D. Smoot, A. Kirillova, and K. Gall. “Flaw Sensitivity and Tensile Fatigue of Poly(Vinyl Alcohol) Hydrogels.” Macromolecular Materials and Engineering 306, no. 3 (March 1, 2021). https://doi.org/10.1002/mame.202000679.

Barber, Helena, Cambre N. Kelly, Kaitlin Nelson, and Ken Gall. “Compressive anisotropy of sheet and strut based porous Ti-6Al-4V scaffolds.” Journal of the Mechanical Behavior of Biomedical Materials 115 (March 2021): 104243. https://doi.org/10.1016/j.jmbbm.2020.104243.

Bickhaus, Jennifer A., Matthew O. Fraser, Alison C. Weidner, Friederike L. Jayes, Cindy L. Amundsen, Ken Gall, Frank C. Marini, Stanley J. Robboy, and Nazema Y. Siddiqui. “Evaluation of Host Immune Cellular and Extracellular Matrix Responses to Prolapse Mesh With and Without Tension in a Rat Model.” Female Pelvic Med Reconstr Surg 27, no. 2 (February 1, 2021): e385–91. https://doi.org/10.1097/SPV.0000000000000943.

Bickhaus, Jennifer A., Matthew O. Fraser, Alison C. Weidner, Friederike L. Jayes, Cindy L. Amundsen, Ken Gall, Andrew T. Miller, Frank C. Marini, Stanley J. Robboy, and Nazema Y. Siddiqui. “Polycarbonate Urethane Mesh: A New Material for Pelvic Reconstruction.” Female Pelvic Med Reconstr Surg 27, no. 2 (February 1, 2021): e469–75. https://doi.org/10.1097/SPV.0000000000000964.

Zhao, Jiacheng, Alina Kirillova, Cambre N. Kelly, Heng Xu, William J. Koshut, Feichen Yang, Ken Gall, and Benjamin J. Wiley. “High-Strength Hydrogel Attachment through Nanofibrous Reinforcement.” Advanced Healthcare Materials 10, no. 4 (February 2021): e2001119. https://doi.org/10.1002/adhm.202001119.

Windheim, N. von, D. W. Collinson, T. Lau, L. C. Brinson, and K. Gall. “The influence of porosity, crystallinity and interlayer adhesion on the tensile strength of 3D printed polylactic acid (PLA).” Rapid Prototyping Journal 27, no. 7 (January 1, 2021): 1327–36. https://doi.org/10.1108/RPJ-08-2020-0205.

Abar, Bijan, Alejandro Alonso-Calleja, Alexander Kelly, Cambre Kelly, Ken Gall, and Jennifer L. West. “3D printing of high-strength, porous, elastomeric structures to promote tissue integration of implants.” Journal of Biomedical Materials Research. Part A 109, no. 1 (January 2021): 54–63. https://doi.org/10.1002/jbm.a.37006.

Kirillova, Alina, Olivia Nillissen, Samuel Liu, Cambre Kelly, and Ken Gall. “Reinforcement and Fatigue of a Bioinspired Mineral-Organic Bioresorbable Bone Adhesive.” Advanced Healthcare Materials 10, no. 2 (January 2021): e2001058. https://doi.org/10.1002/adhm.202001058.

2020

Pham, A., C. Kelly, and K. Gall. “Free boundary effects and representative volume elements in 3D printed Ti-6Al-4V gyroid structures.” Journal of Materials Research 35, no. 19 (October 14, 2020): 2547–55. https://doi.org/10.1557/jmr.2020.105.

Allen, Brian, Christina Moore, Thorsten Seyler, and Ken Gall. “Modulating antibiotic release from reservoirs in 3D-printed orthopedic devices to treat periprosthetic joint infection.” J Orthop Res 38, no. 10 (October 2020): 2239–49. https://doi.org/10.1002/jor.24640.

Yang, F., J. Zhao, W. J. Koshut, J. Watt, J. C. Riboh, K. Gall, and B. J. Wiley. “A Synthetic Hydrogel Composite with the Mechanical Behavior and Durability of Cartilage.” Advanced Functional Materials 30, no. 36 (September 1, 2020). https://doi.org/10.1002/adfm.202003451.

Safranski, D., K. Dupont, and K. Gall. “Pseudoelastic NiTiNOL in Orthopaedic Applications.” Shape Memory and Superelasticity 6, no. 3 (September 1, 2020): 332–41. https://doi.org/10.1007/s40830-020-00294-y.

Erickson, Melissa M., Eric S. Richardson, Nicholas M. Hernandez, Dana W. Bobbert, Ken Gall, and Paul Fearis. “Helmet Modification to PPE With 3D Printing During the COVID-19 Pandemic at Duke University Medical Center: A Novel Technique.” J Arthroplasty 35, no. 7S (July 2020): S23–27. https://doi.org/10.1016/j.arth.2020.04.035.

Torstrick, F Brennan, Angela S. P. Lin, David L. Safranski, Daniel Potter, Todd Sulchek, Christopher S. D. Lee, Ken Gall, and Robert E. Guldberg. “Effects of Surface Topography and Chemistry on Polyether-Ether-Ketone (PEEK) and Titanium Osseointegration.” Spine 45, no. 8 (April 2020): E417–24. https://doi.org/10.1097/brs.0000000000003303.

Koshut, W. J., D. Smoot, C. Rummel, A. Kirillova, and K. Gall. “Tensile Fatigue of Poly(Vinyl Alcohol) Hydrogels with Bio-Friendly Toughening Agents.” Macromolecular Materials and Engineering 305, no. 3 (March 1, 2020). https://doi.org/10.1002/mame.201900784.

2019

Torstrick, F Brennan, Brett S. Klosterhoff, Christopher S. D. Lee, Ken Gall, and David L. Safranski. “Authors' reply to Letter to the Editor regarding: Impaction durability of porous PEEK and titanium-coated PEEK interbody fusion devices.” The Spine Journal : Official Journal of the North American Spine Society 19, no. 12 (December 2019): 2042–43. https://doi.org/10.1016/j.spinee.2019.06.015.

Kelly, Cambre N., Jaedyn Francovich, S. Julmi, David Safranski, Robert E. Guldberg, Hans J. Maier, and Ken Gall. “Fatigue behavior of As-built selective laser melted titanium scaffolds with sheet-based gyroid microarchitecture for bone tissue engineering.” Acta Biomaterialia 94 (August 2019): 610–26. https://doi.org/10.1016/j.actbio.2019.05.046.

Green, Jason L., David Ruppert, Richard Glisson, Mohamed Ibrahim, Ken Gall, and Howard Levinson. “Application of a novel suture anchor to abdominal wall closure.” Am J Surg 218, no. 1 (July 2019): 1–6. https://doi.org/10.1016/j.amjsurg.2019.04.016.