Publications

Found 275 results
[ Type(Desc)] Year
Conference Paper
FB Koehler, TM Sanderson, DL Safranski, K Gall, V Jaker, J Orrock, and C Holshauser. "3D printing of thermoplastic polyurethane shape memory polymer." In Camx 2015 Composites and Advanced Materials Expo, 2231-2245. 2015.
R Mirzaeifar, R DesRoches, A Yavari, and K Gall. "Bending analysis of textured polycrystalline shape memory alloy beams." In Asme 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Smasis 2012, 117-124. Vol. 2. 2012.
AM Ortega, CP Frick, J Tyber, K Gall, and HJ Maier. "Cast NiTi shape-memory alloys." In Materials Research Society Symposium Proceedings, 13-18. Vol. 855. 2004.
R Mirzaeifar, R DesRoches, A Yavari, and K Gall. "A closed-form solution for superelastic shape memory alloy beams subjected to bending." In Smart Structures and Materials 2005: Active Materials: Behavior and Mechanics. Vol. 8342. 2012.
K Gall, and H Sehitoglu. "Crack closure and microstructurally short fatigue crack growth rates." In Advances in Fracture Research, Vols 1 6, 1475-1482. 1997.
K Gall, N West, K Spark, and D Finch. "Creep and stress relaxation in bilayer Au/Si microcantilevers." In Smart Structures and Materials 2005: Active Materials: Behavior and Mechanics, 163-175. Vol. 5343. 2004.
K Gall, DL McDowell, MA Di Prima, M Lesniewski, T Sanderson, and D Campbell. "Cyclic and monotonic behavior of epoxy shape memory polymer foam." In Advances in Heterogeneous Material Mechanics 2008 Proceedings of the 2nd International Conference on Heterogeneous Material Mechanics, Ichmm 2008. 2008.
H Sehitoglu, R Anderson, I Karaman, K Gall, and Y Chumlyakov. "Cyclic deformation behavior of single crystal NiTi." In Materials Science and Engineering: A, 67-74. Vol. 314. 2001.
CS Hazelton, KR Gall, ER Abrahamson, RJ Denis, and MS Lake. "Development of a prototype elastic memory composite stem for large space structures." In Collection of Technical Papers Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference, 5265-5274. Vol. 7. 2003.
KR Gall, MS Lake, J Harvey, and E Ricca. "Development of a shockless thermally actuated release nut using elastic memory composite material." In Collection of Technical Papers Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference, 1623-1633. Vol. 3. 2003.
M Tupper, N Munshi, F Beavers, T Meink, K Gall, and M Mikulas. "Developments in elastic memory composite materials for spacecraft deployable structures." In Ieee Aerospace Conference Proceedings, 52541-52548. Vol. 5. 2001.
K Gall, ML Dunn, M Hulse, D Finch, and SM George. "Effect of Al2O3 ALD nanocoatings on the thermo-mechanical behavior of Au/Si MEMS structures." In Ieee International Reliability Physics Symposium Proceedings, 463-472. Vol. 2003-January. 2003.
K Gall, ML Dunn, M Hulse, D Finch, and SM George. "Effect of Al/sub 2/O/sub 3/ ALD nanocoatings on the thermo-mechanical behavior of Au/Si MEMS structures." In 2003 Ieee International Reliability Physics Symposium Proceedings, 2003. 41st Annual., 463-472.
AM Ortega, CM Yakacki, SA Dixon, AR Greenberg, and K Gall. "Effect of chemical crosslinking on the free-strain recovery characteristics of amorphous shape-memory polymers." In Materials Research Society Symposium Proceedings, 13-18. Vol. 1190. 2009.
D Safranski, and K Gall. "Effect of chemistry on thermo-mechanical shape-memory properties of acrylate networks." In Advances in Heterogeneous Material Mechanics 2008 Proceedings of the 2nd International Conference on Heterogeneous Material Mechanics, Ichmm 2008. 2008.
D Safranski, and K Gall. "Effect of sidegroup on mechanical properties of acrylate networks for biomedical applications." In Proceedings of the Asme Summer Bioengineering Conference, Sbc2008, 665-666. 2009.
CM Yakacki, M Poukalova, RE Guldberg, A Lin, and K Gall. "The effect of trabecular microstructure and mechanical properties on the pullout strength of suture anchors." In Proceedings of the Asme Summer Bioengineering Conference 2009, Sbc2009, 631-632. 2009.
SC Arzberger, ML Tupper, MS Lake, R Barrett, K Mallick, C Hazelton, W Francis, PN Keller, D Campbell, S Feucht et al. "Elastic Memory Composites (EMC) for deployable industrial and commercial applications." In Smart Structures and Materials 2005: Active Materials: Behavior and Mechanics, 35-47. Vol. 5762. 2005.
C Frick, K Gall, A Ortega, J Tyber, and H MAIER. "Fatigue and asymmetric deformation of nitinol shape memory alloys." In Medical Device Materials Proceedings of the Materials and Processes for Medical Devices Conference 2003, 193-198. 2003.
H Sehitoglu, K Gall, and AM Garcia. "Fatigue crack growth - a modeling perspective." In Proceedings of the Tms Fall Meeting, 181-190. 1997.
CM Yakacki, R Shandas, C Lanning, and K Gall. "Free recovery effects of shape-memory polymers for cardiovascular stents." In Materials Research Society Symposium Proceedings, 184-191. Vol. 898. 2005.
DC Miller, KA Gall, and CR Stoldt. "Galvanic cell formation during mems release processes: Implications for sub-micron device fabrication." In American Society of Mechanical Engineers, Micro Electro Mechanical Systems Division, (Publications) Mems, 35-44. 2004.
DC Miller, WL Hughes, ZL Wangt, K Gall, and CR Stoldt. "Galvanic corrosion: A microsystems device integrity and reliability concern." In Smart Structures and Materials 2005: Active Materials: Behavior and Mechanics. Vol. 6111. 2006.
FB Torstrick, DL Safranski, JK Burkus, JL Chappuis, CSD Lee, RE Guldberg, K Gall, and KE Smith. "Getting PEEK to Stick to Bone: The Development of Porous PEEK for Interbody Fusion Devices." In Techniques in Orthopaedics (Rockville, Md.), 158-166. Vol. 32. 2017.
J Tyber, K Gall, C Frick, A Ortega, J Taelle, D Steinke, E Harady, and D Pacacclo. "Improved fracture healing with use of shape memory alloys." In Medical Device Materials Ii Proceedings of the Materials and Processes for Medical Devices Conference 2004, 124-127. 2005.

Pages