Publications

2024

Mathey, Elizabeth, Amanda Heimbrook, R. D. Carpenter, Cambre N. Kelly, and Ken Gall. “Finite element modeling of the free boundary effect on gyroid additively manufactured samples.” Computer Methods in Biomechanics and Biomedical Engineering, March 2024, 1–12. https://doi.org/10.1080/10255842.2024.2326929.

Abar, Bijan, Elijah Vail, Elizabeth Mathey, Ella Park, Nicholas B. Allen, Samuel B. Adams, and Ken Gall. “A bending model for assessing relative stiffness and strength of orthopaedic fixation constructs.” Clin Biomech (Bristol, Avon) 111 (January 2024): 106135. https://doi.org/10.1016/j.clinbiomech.2023.106135.

2023

Peloquin, J., Y. Han, and K. Gall. “Printability and mechanical behavior as a function of base material, structure, and a wide range of porosities for polymer lattice structures fabricated by vat-based 3D printing.” Additive Manufacturing 78 (September 25, 2023). https://doi.org/10.1016/j.addma.2023.103892.

Johnson, James W., Ben Gadomski, Kevin Labus, Holly Stewart, Brad Nelson, Howie Seim, Dan Regan, et al. “Novel 3D printed lattice structure titanium cages evaluated in an ovine model of interbody fusion.” JOR Spine 6, no. 3 (September 2023): e1268. https://doi.org/10.1002/jsp2.1268.

Peloquin, J., A. Kirillova, C. Rudin, L. C. Brinson, and K. Gall. “Prediction of tensile performance for 3D printed photopolymer gyroid lattices using structural porosity, base material properties, and machine learning.” Materials and Design 232 (August 1, 2023). https://doi.org/10.1016/j.matdes.2023.112126.

Peloquin, Jacob, Alina Kirillova, Elizabeth Mathey, Cynthia Rudin, L Catherine Brinson, and Ken Gall. “Tensile performance data of 3D printed photopolymer gyroid lattices.” Data in Brief 49 (August 2023): 109396. https://doi.org/10.1016/j.dib.2023.109396.

Bachtiar, Emilio, Katrina Knight, Pamela Moalli, and Ken Gall. “Deformation and Durability of Soft 3D-printed Polycarbonate Urethane Porous Membranes for Potential Use in Pelvic Organ Prolapse.” Journal of Biomechanical Engineering, May 2023, 1–62. https://doi.org/10.1115/1.4062490.

2022

Nelson, K., C. N. Kelly, and K. Gall. “Effect of stress state on the mechanical behavior of 3D printed porous Ti6Al4V scaffolds produced by laser powder bed fusion.” Materials Science and Engineering: B 286 (December 1, 2022). https://doi.org/10.1016/j.mseb.2022.116013.

Heimbrook, A., C. Kelly, and K. Gall. “Interface contact behavior of 3D printed porous surfaces.” Journal of Materials Research and Technology 21 (November 1, 2022): 4115–26. https://doi.org/10.1016/j.jmrt.2022.10.104.

Koshut, W. J., N. Kwon, J. Zhao, A. Amendola, B. J. Wiley, and K. Gall. “Flaw sensitivity and tensile fatigue of a high-strength hydrogel.” International Journal of Fatigue 163 (October 1, 2022). https://doi.org/10.1016/j.ijfatigue.2022.107071.

Zhao, J., H. Tong, A. Kirillova, W. J. Koshut, A. Malek, N. C. Brigham, M. L. Becker, K. Gall, and B. J. Wiley. “A Synthetic Hydrogel Composite with a Strength and Wear Resistance Greater than Cartilage.” Advanced Functional Materials 32, no. 41 (October 1, 2022). https://doi.org/10.1002/adfm.202205662.

Kirillova, Alina, Taylor R. Yeazel, Ken Gall, and Matthew L. Becker. “Thiol-Based Three-Dimensional Printing of Fully Degradable Poly(propylene fumarate) Star Polymers.” ACS Applied Materials & Interfaces 14, no. 34 (August 2022): 38436–47. https://doi.org/10.1021/acsami.2c06553.

Kirillova, A., C. Kelly, S. Liu, J. Francovich, and K. Gall. “High-Strength Composites Based on 3D Printed Porous Scaffolds Infused with a Bioresorbable Mineral–Organic Bone Adhesive.” Advanced Engineering Materials 24, no. 7 (July 1, 2022). https://doi.org/10.1002/adem.202101367.

Sharp, Rachael, Matthew H. Pelletier, William R. Walsh, Cambre N. Kelly, and Ken Gall. “Corrosion Resistance of 3D Printed Ti6Al4V Gyroid Lattices with Varying Porosity.” Materials (Basel, Switzerland) 15, no. 14 (July 2022): 4805. https://doi.org/10.3390/ma15144805.

Guo, S., M. J. Kim, J. C. Siu, N. Von Windheim, K. Gall, S. Lin, and B. J. Wiley. “Eight-Fold Intensification of Electrochemical Azidooxygenation with a Flow-Through Electrode.” ACS Sustainable Chemistry and Engineering 10, no. 23 (June 13, 2022): 7648–57. https://doi.org/10.1021/acssuschemeng.2c01525.

Heimbrook, Amanda, Cambre Kelly, and Ken Gall. “Effects of 3D printed surface topography and normal force on implant expulsion.” Journal of the Mechanical Behavior of Biomedical Materials 130 (June 2022): 105208. https://doi.org/10.1016/j.jmbbm.2022.105208.

Abar, Bijan, Nicholas Kwon, Nicholas B. Allen, Trent Lau, Lindsey G. Johnson, Ken Gall, and Samuel B. Adams. “Outcomes of Surgical Reconstruction Using Custom 3D-Printed Porous Titanium Implants for Critical-Sized Bone Defects of the Foot and Ankle.” Foot Ankle Int 43, no. 6 (June 2022): 750–61. https://doi.org/10.1177/10711007221077113.

Collinson, D. W., N. von Windheim, K. Gall, and L. C. Brinson. “Direct evidence of interfacial crystallization preventing weld formation during fused filament fabrication of poly(ether ether ketone).” Additive Manufacturing 51 (March 1, 2022). https://doi.org/10.1016/j.addma.2022.102604.

Sipe, Joana Marie, Nathan Bossa, William Berger, Natalia von Windheim, Ken Gall, and Mark R. Wiesner. “From bottle to microplastics: Can we estimate how our plastic products are breaking down?” The Science of the Total Environment 814 (March 2022): 152460. https://doi.org/10.1016/j.scitotenv.2021.152460.

Chaudhary, Usamah N., Cambre N. Kelly, Benjamin R. Wesorick, Cameron M. Reese, Ken Gall, Samuel B. Adams, Guillermo Sapiro, and J Matias Di Martino. “Computational and image processing methods for analysis and automation of anatomical alignment and joint spacing in reconstructive surgery.” Int J Comput Assist Radiol Surg 17, no. 3 (March 2022): 541–51. https://doi.org/10.1007/s11548-021-02548-1.

Bishawi, M., M. Kaplan, S. Chidyagwai, J. Cappiello, A. Cherry, D. MacLeod, K. Gall, et al. “Patient- and Ventilator-Specific Modeling to Drive the Use and Development of 3D Printed Devices for Rapid Ventilator Splitting During the COVID-19 Pandemic.” In Lecture Notes in Computer Science (Including Subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 13352 LNCS:137–49, 2022. https://doi.org/10.1007/978-3-031-08757-8_13.

2021

Chu, S., J. Guilleminot, C. Kelly, B. Abar, and K. Gall. “Stochastic Modeling and identification of material parameters on structures produced by additive manufacturing.” Computer Methods in Applied Mechanics and Engineering 387 (December 15, 2021). https://doi.org/10.1016/j.cma.2021.114166.

Kelly, Cambre N., Tian Wang, James Crowley, Dan Wills, Matthew H. Pelletier, Edward R. Westrick, Samuel B. Adams, Ken Gall, and William R. Walsh. “High-strength, porous additively manufactured implants with optimized mechanical osseointegration.” Biomaterials 279 (December 2021): 121206. https://doi.org/10.1016/j.biomaterials.2021.121206.

Ruppert, David S., Mahmoud M. Mohammed, Mohamed M. Ibrahim, Emilio O. Bachtiar, Kevin Erning, Kayvan Ansari, Jeffrey I. Everitt, et al. “Poly(lactide-co-ε-caprolactone) scaffold promotes equivalent tissue integration and supports skin grafts compared to a predicate collagen scaffold.” Wound Repair Regen 29, no. 6 (November 2021): 1035–50. https://doi.org/10.1111/wrr.12951.

Abar, Bijan, Cambre Kelly, Anh Pham, Nicholas Allen, Helena Barber, Alexander Kelly, Anthony J. Mirando, Matthew J. Hilton, Ken Gall, and Samuel B. Adams. “Effect of surface topography on in vitro osteoblast function and mechanical performance of 3D printed titanium.” J Biomed Mater Res A 109, no. 10 (October 2021): 1792–1802. https://doi.org/10.1002/jbm.a.37172.