Publications

Torstrick, F Brennan, David L. Safranski, J Kenneth Burkus, James L. Chappuis, Christopher S. D. Lee, Robert E. Guldberg, Ken Gall, and Kathryn E. Smith. “Getting PEEK to Stick to Bone: The Development of Porous PEEK for Interbody Fusion Devices.” In Techniques in Orthopaedics (Rockville, Md.), 32:158–66, 2017. https://doi.org/10.1097/bto.0000000000000242.

Sycks, D. G., D. L. Safranski, N. B. Reddy, E. Sun, and K. Gall. “Tough Semicrystalline Thiol-Ene Photopolymers Incorporating Spiroacetal Alkenes.” Macromolecules 50, no. 11 (June 13, 2017): 4281–91. https://doi.org/10.1021/acs.macromol.7b00628.

Miller, A. T., D. L. Safranski, K. E. Smith, D. G. Sycks, R. E. Guldberg, and K. Gall. “Fatigue of injection molded and 3D printed polycarbonate urethane in solution.” Polymer 108 (January 13, 2017): 121–34. https://doi.org/10.1016/j.polymer.2016.11.055.

Smith, K. E., M. Garcia, K. M. Dupont, G. B. Higgs, K. Gall, and D. L. Safranski. “Shape-memory Polymers for Orthopaedic Soft-Tissue Repair.” In Techniques in Orthopaedics, 32:141–48, 2017. https://doi.org/10.1097/BTO.0000000000000247.

Safranski, D. L., and K. Gall. “Development of Novel Orthopaedic Materials.” Techniques in Orthopaedics 32, no. 3 (January 1, 2017): 131. https://doi.org/10.1097/BTO.0000000000000248.

Safranski, D. L., S. L. Laffoon, D. G. Sycks, and K. Gall. “Material Selection.” In Shape Memory Polymer Device Design, 77–112, 2017. https://doi.org/10.1016/B978-0-323-37797-3.00003-8.

Evans, Nathan T., F Brennan Torstrick, David L. Safranski, Robert E. Guldberg, and Ken Gall. “Local deformation behavior of surface porous polyether-ether-ketone.” Journal of the Mechanical Behavior of Biomedical Materials 65 (January 2017): 522–32. https://doi.org/10.1016/j.jmbbm.2016.09.006.

Olivares-Navarrete, Rene, Erin M. Lee, Kathryn Smith, Sharon L. Hyzy, Maryam Doroudi, Joseph K. Williams, Ken Gall, Barbara D. Boyan, and Zvi Schwartz. “Substrate Stiffness Controls Osteoblastic and Chondrocytic Differentiation of Mesenchymal Stem Cells without Exogenous Stimuli.” PloS One 12, no. 1 (January 2017): e0170312. https://doi.org/10.1371/journal.pone.0170312.

Lee, Erin M., Kathryn Smith, Ken Gall, Barbara D. Boyan, and Zvi Schwartz. “Change in surface roughness by dynamic shape-memory acrylate networks enhances osteoblast differentiation.” Biomaterials 110 (December 2016): 34–44. https://doi.org/10.1016/j.biomaterials.2016.08.004.

Torstrick, F Brennan, Nathan T. Evans, Hazel Y. Stevens, Ken Gall, and Robert E. Guldberg. “Do Surface Porosity and Pore Size Influence Mechanical Properties and Cellular Response to PEEK?” Clinical Orthopaedics and Related Research 474, no. 11 (November 2016): 2373–83. https://doi.org/10.1007/s11999-016-4833-0.

Elias, J. J., M. J. Kelly, K. E. Smith, K. A. Gall, and J. Farr. “Dynamic Simulation of the Effects of Graft Fixation Errors During Medial Patellofemoral Ligament Reconstruction.” Orthopaedic Journal of Sports Medicine 4, no. 9 (September 12, 2016). https://doi.org/10.1177/2325967116665080.

Smith, Kathryn E., Kenneth M. Dupont, David L. Safranski, Jeremy Blair, Dawn Buratti, Vladimir Zeetser, Ryan Callahan, Jason Lin, and Ken Gall. “Use of 3D Printed Bone Plate in Novel Technique to Surgically Correct Hallux Valgus Deformities.” In Techniques in Orthopaedics (Rockville, Md.), 31:181–89, 2016. https://doi.org/10.1097/bto.0000000000000189.

Evans, Nathan T., Cameron W. Irvin, David L. Safranski, and Ken Gall. “Impact of surface porosity and topography on the mechanical behavior of high strength biomedical polymers.” Journal of the Mechanical Behavior of Biomedical Materials 59 (June 2016): 459–73. https://doi.org/10.1016/j.jmbbm.2016.02.033.

Miller, Andrew T., David L. Safranski, Kathryn E. Smith, Robert E. Guldberg, and Ken Gall. “Compressive cyclic ratcheting and fatigue of synthetic, soft biomedical polymers in solution.” Journal of the Mechanical Behavior of Biomedical Materials 54 (February 2016): 268–82. https://doi.org/10.1016/j.jmbbm.2015.09.034.

Murph, S. E. H., C. J. Murphy, A. Leach, and K. Gall. “A possible oriented attachment growth mechanism for silver nanowire formation.” Crystal Growth and Design 15, no. 4 (April 1, 2015): 1968–74. https://doi.org/10.1021/acs.cgd.5b00123.

Evans, Nathan T., F Brennan Torstrick, Christopher S. D. Lee, Kenneth M. Dupont, David L. Safranski, W Allen Chang, Annie E. Macedo, et al. “High-strength, surface-porous polyether-ether-ketone for load-bearing orthopedic implants.” Acta Biomaterialia 13 (February 2015): 159–67. https://doi.org/10.1016/j.actbio.2014.11.030.

Culshaw, M. G., S. J. Booth, V. I. Osipov, and A. S. Victorov. “Environmental security of the European cross-border energy supply infrastructure.” Environmental Security of the European Cross Border Energy Supply Infrastructure, January 1, 2015, 1–253. https://doi.org/10.1007/978-94-017-9538-8.

Koehler, F. B., T. M. Sanderson, D. L. Safranski, K. Gall, V. Jaker, J. Orrock, and C. Holshauser. “3D printing of thermoplastic polyurethane shape memory polymer.” In CAMX 2015 - Composites and Advanced Materials Expo, 2231–45, 2015.

Koehler, F. B., T. M. Sanderson, D. L. Safranski, K. Gall, V. Jaker, J. Orrock, and C. Holshauser. “3D printing of thermoplastic polyurethane shape memory polymer.” In Camx 2015 Composites and Advanced Materials Expo, 2231–45, 2015.

Safranski, David L., Daiana Weiss, J Brian Clark, W Robert Taylor, and Ken Gall. “Semi-degradable poly(β-amino ester) networks with temporally controlled enhancement of mechanical properties.” Acta Biomaterialia 10, no. 8 (August 2014): 3475–83. https://doi.org/10.1016/j.actbio.2014.04.022.

Mirzaeifar, R., K. Gall, T. Zhu, A. Yavari, and R. Desroches. “Structural transformations in NiTi shape memory alloy nanowires.” Journal of Applied Physics 115, no. 19 (May 21, 2014). https://doi.org/10.1063/1.4876715.

Jiang, J. W., A. M. Leach, K. Gall, H. S. Park, and T. Rabczuk. “A surface stacking fault energy approach to predicting defect nucleation in surface-dominated nanostructures.” Journal of the Mechanics and Physics of Solids 61, no. 9 (September 1, 2013): 1915–34. https://doi.org/10.1016/j.jmps.2013.04.008.

Mirzaeifar, R., R. Desroches, A. Yavari, and K. Gall. “A micromechanical analysis of the coupled thermomechanical superelastic response of textured and untextured polycrystalline NiTi shape memory alloys.” Acta Materialia 61, no. 12 (July 1, 2013): 4542–58. https://doi.org/10.1016/j.actamat.2013.04.023.

Mirzaeifar, R., R. Desroches, A. Yavari, and K. Gall. “On superelastic bending of shape memory alloy beams.” International Journal of Solids and Structures 50, no. 10 (May 15, 2013): 1664–80. https://doi.org/10.1016/j.ijsolstr.2013.01.035.

Kasprzak, S. E., B. A. Wester, T. Raj, M. Allen, and K. Gall. “Photopatterning of thiol-ene-acrylate copolymers.” Journal of Microelectromechanical Systems 22, no. 2 (January 1, 2013): 339–48. https://doi.org/10.1109/JMEMS.2012.2226927.