Publications

Zhao, Jiacheng, Alina Kirillova, Cambre N. Kelly, Heng Xu, William J. Koshut, Feichen Yang, Ken Gall, and Benjamin J. Wiley. “High-Strength Hydrogel Attachment through Nanofibrous Reinforcement.” Advanced Healthcare Materials 10, no. 4 (February 2021): e2001119. https://doi.org/10.1002/adhm.202001119.

Bickhaus, Jennifer A., Matthew O. Fraser, Alison C. Weidner, Friederike L. Jayes, Cindy L. Amundsen, Ken Gall, Frank C. Marini, Stanley J. Robboy, and Nazema Y. Siddiqui. “Evaluation of Host Immune Cellular and Extracellular Matrix Responses to Prolapse Mesh With and Without Tension in a Rat Model.” Female Pelvic Med Reconstr Surg 27, no. 2 (February 1, 2021): e385–91. https://doi.org/10.1097/SPV.0000000000000943.

Windheim, N. von, D. W. Collinson, T. Lau, L. C. Brinson, and K. Gall. “The influence of porosity, crystallinity and interlayer adhesion on the tensile strength of 3D printed polylactic acid (PLA).” Rapid Prototyping Journal 27, no. 7 (January 1, 2021): 1327–36. https://doi.org/10.1108/RPJ-08-2020-0205.

Abar, Bijan, Alejandro Alonso-Calleja, Alexander Kelly, Cambre Kelly, Ken Gall, and Jennifer L. West. “3D printing of high-strength, porous, elastomeric structures to promote tissue integration of implants.” Journal of Biomedical Materials Research. Part A 109, no. 1 (January 2021): 54–63. https://doi.org/10.1002/jbm.a.37006.

Kirillova, Alina, Olivia Nillissen, Samuel Liu, Cambre Kelly, and Ken Gall. “Reinforcement and Fatigue of a Bioinspired Mineral-Organic Bioresorbable Bone Adhesive.” Advanced Healthcare Materials 10, no. 2 (January 2021): e2001058. https://doi.org/10.1002/adhm.202001058.

Pham, A., C. Kelly, and K. Gall. “Free boundary effects and representative volume elements in 3D printed Ti-6Al-4V gyroid structures.” Journal of Materials Research 35, no. 19 (October 14, 2020): 2547–55. https://doi.org/10.1557/jmr.2020.105.

Allen, Brian, Christina Moore, Thorsten Seyler, and Ken Gall. “Modulating antibiotic release from reservoirs in 3D-printed orthopedic devices to treat periprosthetic joint infection.” J Orthop Res 38, no. 10 (October 2020): 2239–49. https://doi.org/10.1002/jor.24640.

Yang, F., J. Zhao, W. J. Koshut, J. Watt, J. C. Riboh, K. Gall, and B. J. Wiley. “A Synthetic Hydrogel Composite with the Mechanical Behavior and Durability of Cartilage.” Advanced Functional Materials 30, no. 36 (September 1, 2020). https://doi.org/10.1002/adfm.202003451.

Safranski, D., K. Dupont, and K. Gall. “Pseudoelastic NiTiNOL in Orthopaedic Applications.” Shape Memory and Superelasticity 6, no. 3 (September 1, 2020): 332–41. https://doi.org/10.1007/s40830-020-00294-y.

Erickson, Melissa M., Eric S. Richardson, Nicholas M. Hernandez, Dana W. Bobbert, Ken Gall, and Paul Fearis. “Helmet Modification to PPE With 3D Printing During the COVID-19 Pandemic at Duke University Medical Center: A Novel Technique.” J Arthroplasty 35, no. 7S (July 2020): S23–27. https://doi.org/10.1016/j.arth.2020.04.035.

Torstrick, F Brennan, Angela S. P. Lin, David L. Safranski, Daniel Potter, Todd Sulchek, Christopher S. D. Lee, Ken Gall, and Robert E. Guldberg. “Effects of Surface Topography and Chemistry on Polyether-Ether-Ketone (PEEK) and Titanium Osseointegration.” Spine 45, no. 8 (April 2020): E417–24. https://doi.org/10.1097/brs.0000000000003303.

Koshut, W. J., D. Smoot, C. Rummel, A. Kirillova, and K. Gall. “Tensile Fatigue of Poly(Vinyl Alcohol) Hydrogels with Bio-Friendly Toughening Agents.” Macromolecular Materials and Engineering 305, no. 3 (March 1, 2020). https://doi.org/10.1002/mame.201900784.

Torstrick, F Brennan, Brett S. Klosterhoff, Christopher S. D. Lee, Ken Gall, and David L. Safranski. “Authors' reply to Letter to the Editor regarding: Impaction durability of porous PEEK and titanium-coated PEEK interbody fusion devices.” The Spine Journal : Official Journal of the North American Spine Society 19, no. 12 (December 2019): 2042–43. https://doi.org/10.1016/j.spinee.2019.06.015.

Kelly, Cambre N., Jaedyn Francovich, S. Julmi, David Safranski, Robert E. Guldberg, Hans J. Maier, and Ken Gall. “Fatigue behavior of As-built selective laser melted titanium scaffolds with sheet-based gyroid microarchitecture for bone tissue engineering.” Acta Biomaterialia 94 (August 2019): 610–26. https://doi.org/10.1016/j.actbio.2019.05.046.

Green, Jason L., David Ruppert, Richard Glisson, Mohamed Ibrahim, Ken Gall, and Howard Levinson. “Application of a novel suture anchor to abdominal wall closure.” Am J Surg 218, no. 1 (July 2019): 1–6. https://doi.org/10.1016/j.amjsurg.2019.04.016.

Kelly, Cambre N., Nathan T. Evans, Cameron W. Irvin, Savita C. Chapman, Ken Gall, and David L. Safranski. “The effect of surface topography and porosity on the tensile fatigue of 3D printed Ti-6Al-4V fabricated by selective laser melting.” Materials Science & Engineering. C, Materials for Biological Applications 98 (May 2019): 726–36. https://doi.org/10.1016/j.msec.2019.01.024.

Warder, Henry H., Joseph K. Fairley, Joshua Coutts, Richard R. Glisson, and Ken Gall. “Examining the viability of carbon fiber reinforced three-dimensionally printed prosthetic feet created by composite filament fabrication.” Prosthetics and Orthotics International 42, no. 6 (December 2018): 644–51. https://doi.org/10.1177/0309364618785726.

Torstrick, F Brennan, Angela S. P. Lin, Daniel Potter, David L. Safranski, Todd A. Sulchek, Ken Gall, and Robert E. Guldberg. “Porous PEEK improves the bone-implant interface compared to plasma-sprayed titanium coating on PEEK.” Biomaterials 185 (December 2018): 106–16. https://doi.org/10.1016/j.biomaterials.2018.09.009.

Kirillova, Alina, Cambre Kelly, Natalia von Windheim, and Ken Gall. “Bioinspired Mineral-Organic Bioresorbable Bone Adhesive.” Advanced Healthcare Materials 7, no. 17 (September 2018): e1800467. https://doi.org/10.1002/adhm.201800467.

Green, J. L., R. Glisson, J. Hung, M. Ibrahim, A. Farjat, B. Liu, K. Gall, and H. Levinson. “Creating a small anchor to eliminate large knots in mesh and tape suture.” Journal of Medical Devices Transactions of the ASME 12, no. 3 (September 1, 2018). https://doi.org/10.1115/1.4040186.

Mickelson, Dayne T., Thomas Lefebvre, Ken Gall, and Jonathan C. Riboh. “Adjustable-Loop Femoral Cortical Suspensory Fixation for Patellar Tendon Anterior Cruciate Ligament Reconstruction: A Time Zero Biomechanical Comparison With Interference Screw Fixation.” The American Journal of Sports Medicine 46, no. 8 (July 2018): 1857–62. https://doi.org/10.1177/0363546518771365.

Sycks, D. G., T. Wu, H. S. Park, and K. Gall. “Tough, stable spiroacetal thiol-ene resin for 3D printing.” Journal of Applied Polymer Science 135, no. 22 (June 10, 2018). https://doi.org/10.1002/app.46259.

Torstrick, F Brennan, Brett S. Klosterhoff, L Erik Westerlund, Kevin T. Foley, Joanna Gochuico, Christopher S. D. Lee, Ken Gall, and David L. Safranski. “Impaction durability of porous polyether-ether-ketone (PEEK) and titanium-coated PEEK interbody fusion devices.” The Spine Journal : Official Journal of the North American Spine Society 18, no. 5 (May 2018): 857–65. https://doi.org/10.1016/j.spinee.2018.01.003.

Ibrahim, Mohamed M., Luke P. Poveromo, Richard R. Glisson, Agustin Cornejo, Alfredo E. Farjat, Ken Gall, and Howard Levinson. “Modifying hernia mesh design to improve device mechanical performance and promote tension-free repair.” J Biomech 71 (April 11, 2018): 43–51. https://doi.org/10.1016/j.jbiomech.2018.01.022.

Kelly, Cambre N., Andrew T. Miller, Scott J. Hollister, Robert E. Guldberg, and Ken Gall. “Design and Structure-Function Characterization of 3D Printed Synthetic Porous Biomaterials for Tissue Engineering.” Advanced Healthcare Materials 7, no. 7 (April 2018): e1701095. https://doi.org/10.1002/adhm.201701095.