Publications
Computational and image processing methods for analysis and automation of anatomical alignment and joint spacing in reconstructive surgery." Int J Comput Assist Radiol Surg 17, no. 3 (2022): 541-551.
"Corrosion Resistance of 3D Printed Ti6Al4V Gyroid Lattices with Varying Porosity." Materials (Basel, Switzerland) 15, no. 14 (2022).
"Direct evidence of interfacial crystallization preventing weld formation during fused filament fabrication of poly(ether ether ketone)." Additive Manufacturing 51 (2022).
"Effect of stress state on the mechanical behavior of 3D printed porous Ti6Al4V scaffolds produced by laser powder bed fusion." Materials Science and Engineering: B 286 (2022).
"Effects of 3D printed surface topography and normal force on implant expulsion." Journal of the Mechanical Behavior of Biomedical Materials 130 (2022).
"Flaw sensitivity and tensile fatigue of a high-strength hydrogel." International Journal of Fatigue 163 (2022).
"From bottle to microplastics: Can we estimate how our plastic products are breaking down?" The Science of the Total Environment 814 (2022).
"High-Strength Composites Based on 3D Printed Porous Scaffolds Infused with a Bioresorbable Mineral–Organic Bone Adhesive." Advanced Engineering Materials 24, no. 7 (2022).
"Interface contact behavior of 3D printed porous surfaces." Journal of Materials Research and Technology 21 (2022): 4115-4126.
"Outcomes of Surgical Reconstruction Using Custom 3D-Printed Porous Titanium Implants for Critical-Sized Bone Defects of the Foot and Ankle." Foot Ankle Int 43, no. 6 (2022): 750-761.
"A Synthetic Hydrogel Composite with a Strength and Wear Resistance Greater than Cartilage." Advanced Functional Materials 32, no. 41 (2022).
"Thiol-Based Three-Dimensional Printing of Fully Degradable Poly(propylene fumarate) Star Polymers." Acs Applied Materials & Interfaces 14, no. 34 (2022): 38436-38447.
"3D printing of high-strength, porous, elastomeric structures to promote tissue integration of implants." Journal of Biomedical Materials Research. Part A 109, no. 1 (2021): 54-63.
"Compressive anisotropy of sheet and strut based porous Ti-6Al-4V scaffolds." Journal of the Mechanical Behavior of Biomedical Materials 115 (2021).
"Correction to: Tensile Fatigue of Poly(Vinyl Alcohol) Hydrogels with Bio-Friendly Toughening Agents (Macromolecular Materials and Engineering, (2020), 305, 3, (1900784), 10.1002/mame.201900784)." Macromolecular Materials and Engineering 306, no. 8 (2021).
"Effect of surface topography on in vitro osteoblast function and mechanical performance of 3D printed titanium." J Biomed Mater Res A 109, no. 10 (2021): 1792-1802.
"Evaluation of Host Immune Cellular and Extracellular Matrix Responses to Prolapse Mesh With and Without Tension in a Rat Model." Female Pelvic Medicine & Reconstructive Surgery 27, no. 2 (2021): e385-e391.
"Fabrication of Biomedical Scaffolds Using Biodegradable Polymers." Chemical Reviews 121, no. 18 (2021): 11238-11304.
"Flaw Sensitivity and Tensile Fatigue of Poly(Vinyl Alcohol) Hydrogels." Macromolecular Materials and Engineering 306, no. 3 (2021).
"Functional repair of critically sized femoral defects treated with bioinspired titanium gyroid-sheet scaffolds." Journal of the Mechanical Behavior of Biomedical Materials 116 (2021).
"High-Strength Hydrogel Attachment through Nanofibrous Reinforcement." Advanced Healthcare Materials 10, no. 4 (2021).
"High-strength, porous additively manufactured implants with optimized mechanical osseointegration." Biomaterials 279 (2021).
"The influence of porosity, crystallinity and interlayer adhesion on the tensile strength of 3D printed polylactic acid (PLA)." Rapid Prototyping Journal 27, no. 7 (2021): 1327-1336.
"Polycarbonate Urethane Mesh: A New Material for Pelvic Reconstruction." Female Pelvic Med Reconstr Surg 27, no. 2 (2021): e469-e475.
"Poly(lactide-co-ε-caprolactone) scaffold promotes equivalent tissue integration and supports skin grafts compared to a predicate collagen scaffold." Wound Repair Regen 29, no. 6 (2021): 1035-1050.
"